FloEFD for Siemens Simcenter3D Applications for fluid and gas flow and heat transfer simulation in the Siemens Simcenter3D environment. FloEFD is fully integrated into the iemens Simcenter3D environment and uses computational fluid dynamics (CFD) based solvers.
Main advantages
Working directly with the model in the Siemens Simcenter3D environment
There is no need to convert geometry to another format, which often leads to a loss of quality.The task of calculating fluid dynamics and heat transfer at any time is fully synchronized with the model
• Analysis of hydro-aerodynamics and heat transfer of two - and three-dimensional models
• Analysis of external and internal flow flows
• Analysis of steady and unsteady flow
• Incompressible liquid and compressible gas flow , including including combustible mixture, at subsonic,
transonic, supersonic and hypersonic flow regimes
• Condensation of water vapor
• Calculation of the relative humidity of air in gas flows
• Flow in non-Newtonian fluids (only laminar flow regime)
• Flow in a compressible fluid (fluid density depends on pressure)
• Flows in real gases
• Laminar analysis , turbulent and unsteady flows
• Analysis of vortex flows and fans
• Analysis of flows with solid inclusions
• Analysis of heat transfer inside and between liquids and solids
• Analysis of heat transfer inside solids in the absence of a washing flow
• Calculation of thermal contact resistance
• Calculation of electrical contact resistance
• Thermoelectric coolers
• Heat transfer by radiation
• Joule heating
• Flows with gravitational effects (also known as the buoyancy effect)
• Porous media
• Heat pipes
• Heat transfer in printed circuit boards
• Heat transfer in perforated plates
• Aerosol flow
• Taking into account the roughness of bodies during
tangential flow wall movements (stirring and rotating)
• Flow in rotating devices
• Cavitation in liquid flows
• Combustion in gas mixtures
System requirements
▪ Microsoft Windows 10 Pro or Enterprise 64-bit
▪ For solver: Microsoft Windows Server 2012, Microsoft Windows Server 2012 R2,
Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows
Server 2016 with HPC Pack 2016, Microsoft Windows Server 2019 with HPC Pack 2019
▪ Microsoft Office 365, Microsoft Office 2019, Microsoft Office 2016, Microsoft Office 2013
▪ Siemens NX 10.0.0.24, 10.0.2.6, 10.0.3.5
Siemens NX 11.0.0.33, 11.0.1.11, 11.0.2.7
Siemens NX 12.0.0.27, 12.0.2.9
Siemens NX 1847 series (tested versions 1855, 1867)
Siemens NX 1872 series (tested versions 1872, 1876, 1880, 1884, 1888, 1892)
Siemens NX 1899 series (tested versions 1899, 1903, 1907, 1911, 1915, 1919)
The update option must not be used to install NX1899. Use of update option leads to missing files required for FLOEFD. An installation from scratch is required.
Siemens NX 1926 series (tested version 1934)
Siemens NX 1953 series (tested versions 1953, 1957, 1961, 1965, 1969, 1973)
Siemens NX 1980 series (tested versions 1980, 1984, 1988, 1992, 1996, 2000)
Siemens NX 2007 series (tested versions 2007, 2008)
Simcenter 3D 2019.2 series (tested versions 1880, 1892)
Simcenter 3D 2020.1 series (tested version 1919)
Simcenter 3D 2020.2 series (tested version 1946)
Simcenter 3D 2021.1 series (tested version 1961)
Simcenter 3D 2021.2 series (tested version 1961)
Simcenter 3D 2021.1 series (tested version 2008)
▪ Teamcenter (tested version 13.2)
▪ HyperLynx SI PI Thermal v2.8.1 and newer
▪ 8 GB RAM minimum, more recommended
▪ 2 GB of free hard disk space, more required for simulation models
▪ Localized languages: French, German, Japanese, Korean, Simplified Chinese, Russian
Whats New
Updates: official site does not provide any info about changes in this version.
~~~~ Welcome to my Blogs ~~~~
Do not forget to check it every day!
If You should find any files not found, please PM me
~
Best Software for All
~
Video Training
~
All Pluralsight Videos
~
Best Ebooks
~
Best Graphics
